Ravel Fire Alarm Systems

Product Details:

UL Listed Control Module to integrate with Conventional Audible devices like Sounder,Sounder cum strobe,strobe,bell etc., Also having supervisory features for NAC circuit as well as the power supply input.Capable to connect multiple notification devices in single module having RED colored LED for status indications with 8 digit Dip switch for address settings.

Product Details:

We are Authorized Associate Partner of Ravel  make Fire Alarm & Detection System which are designed to service the Residential, Commercial & Industrial application. We are offering Conventional & Addressable Fire Alarm System that includes Fire Alarm Panel, Repeater Panel, Smoke Detector, Heat Detector, Manual Call Points, Hooter, Fire Alarm Cables etc.These Fire Alarm System made of best advanced technology & meeting International Standards & Certifications like UL,CE etc considering Safety & Security into account.These systems are easy to install, reliable, long service life & having superior quality.

Our Quality Policy :
: Best Quality Products
: Cost Effective Solution
: Technical Assistance
: Customer Satisfaction
: Building Customer Loyalty
: Long Term Association

Additional Information:

• Production Capacity: 10 nos
• Delivery Time: Ready Stock

Product Details:

The isolator module to be installed between every 16 nos. of devices to isolate the circuit from single short circuit on the analogue addressable loop cable, this is non addressable device with yellow LED for status indications.

Product Details:

Features

• Complies with EN 54.
• Dual LEDs for 360 visibility.
• Advanced detection and communication protocol.
• Stable photoelectric smoke sensing chamber. No adjustment or replacement required
• Polarity insensitive.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple Soft address programming for Easy installation.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

• Indian Manufacturer – International standard.
• UL Certified (9th Edition)
• Touch Keypad for user friendly operation.
• Inbuilt USB.
• Universal Switched Mode Power Supply.
• Modular Construction, Serviceability.
• Networkable.
• Auto Resettable Fuse.
• Surge Protection.
• Battery polarity protection.
• 32 Bit processor.
• Unique protocol feature for fast alarm response.
• Inbuilt conventional circuit.
• Auto learning facility.
• 1016 Devices of any combination per panel.
• Multi protocol.
• Peer to Peer Networking.
• Redundancy : If the main CPU fails, it will raise an alarm like conventional panel.
• User friendly circuit.
• Device / Detector wise configuration facility.
• 2000 Event Storage with Real Time Clock.
• Upto 192 grouping facility.
• Pre Alarm Action.
• All field wiring are power limited and supervised.
• Programmable detector sensitivity.
• Device type verification.
• Earth fault annunciation facility at 0 ohms.
• Double Address Sensing.
• Loop wise device test .
• 40 X 4 Characters LCD display
• Maximum 4 numbers of loop card with Class A, Style 5,6 or 7 and Class B Style 4 wiring
• Maximum 254 devices (any combination) per loop.
• Day / Night Mode facility.
• USB 2.0 Interface for PC connectivity (A to B Type).
• RS 485 Communication facility for Network / Repeater/ MODBUS / BACnet.
• Programmable Auto Silence Facility / AC Loss Delay / Silence Inhibit.
• Two no’s of programmable inputs.
• Battery low audio, visual warning.
• Three programmable Form C relay for Fire, Fault and Supervisory.

Product Details:

UL Listed Analogue addressable Multi Sensor detector with smoke detector and the combination of heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360 degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber.

Get best price for RE-317D SHL Ravel Addressable Multi Detector with Base

Additional Information:

• Delivery Time: AS PER AVAILBILITY

Product Details:

Zone interface module used to connect the conventional smoke,heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system.Shall have RED colored LED for status indications with 8 digit DIP switch for address settings.

Product Details:

• Auto learning facility.
• Loop wise device test .
• Maximum 254 devices (any combination) per loop.
• Loop card can programmable as Class A, Style 5,6 or 7 and Class B Style 4 wiring.

 

Product Details:

The RE 316S-2L conventional detectors are designed to work with ... It has an unique protocol chamber designed to sense smoke produced by wide Conventional smoke Detectors

Product Details:

We are successfully meeting the requirements of our clients by offering the best quality range of RE 316S-2L Photo Electric Smoke Detector With Base.

Features:

• UL listed
• Dual LED’s for 360° visibility
• Advanced detection and communication protocol
• Easy installation and maintenance
• Sleek low-profile housing design
• Regular 100mm base

Product Details:

Product SpecificationSystem ComponentsGas Sapresion PanelProduct TypeAGENT GAS RELEASE PANELUsage/ApplicationCommercialBrandRavelTypeConventionalZones4 ZONEBody MaterialM S BodyNumber Of Zones4 ZONESNo Of Relays3Model Name/NumberRE-25AROperating Voltage14 - 21 V DCAlarm Current15 - 30 mAShort Circuit Current45 mALoop Resistance100 ohmsOperating Temperature0 to 49 Degree CRelative Humidity93%IP RatingIP50Minimum Order Quantity1 PieceProduct Description
We are an accomplished organization which has gained name and fame in providing Ravel 4 Zone Gas Release Panel to the customers.

Additional InformationItem CodeRE-25AR

Product Details:

Product Specification Product DescriptionDetails:

• Conventional Manual Call Point.
• Resettable.
• Special-key.
• Semi-flush or surface mount installation

Additional Information

Product Details:

Product TypeMONITI RAVEL ADDRESSABLE MULTI SENSORBrandRAVELUsage/ApplicationOffice BuildingsAlarm Sensor TypePhotoelectricPower SourceDCAutomation GradeAutomaticMaterialABSIs It Ce CertifiedCe Certified2/4 Wire2 WIREMinimum Order Quantity1 Piece Product Description
Complies with EN 54. CE Approved. ? O ?Dual LED's for 360 visibility. ?Advanced detection and communication protocol. ?Stable photoelectric smoke chamber. (No adjustment or replacement required.) ?Easy installation and maintenance. ?Sleek low-profile housing design. ?Regular 100mm base. Simple soft address programming for easy installation..

Product Details:

Usage/ApplicationFire Alarm SystemBrandRAVELTypeHeat DetectorModel Name/NumberRE-337HCertificationCE APPROVEDAlarm Current7maWeight150gm with baseColorWHITEMaterialABSDimensions100MM/46MMWarranty1 YEARI Deal InNew OnlyMinimum Order Quantity500 Piece Product DescriptionOperating Voltage : 17 ~ 28V DC Reset Voltage : less than 5V Start-Up Current : 800 uA. Start-Up Time : less than 30s. Alarm Current : 7 mA. Reset Time : less than 30s. Sampling Time : less than 1s. Remote Output : 2mA maximum open collector Thermal Rating O O Fixed Temperature : 59 C (138 F) O O Rate of Raise of Temp : 11.1 C / min (20 F/min) O O Operating Temperature : -10 C to 50 C Humidity : 0 - 95% RH, non-condensing
Additional Information Item CodeRE-337H

Product Details:

RE-737MR Relay Module facilitates third party devices to interface with Ravel make addressable panel. Relay modules are the remote devices to activate / de-activate any device or instrument or unit using the potential free contacts. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Module addressing is done by soft addressing method through a Programming Tool or through panel.

Product Details:

RE-737MC Control Module are the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The output circuit is supervised for faulty condition. The Module addressing is done by soft addressing method through Programming Tool or through the panel. 

Product Details:

RE-737MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Monitor circuit is supervised for faulty condition. The module Addressing is done by soft addressing method through Programming tool or through the panel. 

Product Details:

UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in color,shall be polarity insensitive, Insect filter chamber, easy to install, advanced detection and communication protocol.

Additional Information:

• Production Capacity: Many More
• Delivery Time: Ready Stock / As per Availbility

Product Details:

UL listed Monitor Module is applicable to monitor any third party devices integration to monitor the change of state from Normally open to normally close.Having supervisory feature to supervise the circuit connected with third party system having RED colored LED for status indications with 8 digit Dip switch for address settings.

Operating Voltage	:	24 VDC Nominal.
Alarm Current	:	2.7 mA Max.(Latched)
Standby Current	:	0.7 mA
End of Line Resistor	:	47K Ohms
Communication Line Loop Impedance	:	40 Ohms
IDC wiring Resistance	:	100 Ohms Max.
IDC Voltage	:	8 V Max.
Temperature Range	:	0°C to 49°C / 32°- 120°F
Humidity	:	93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F

Product Details:

The Isolator module is an automatic device that isolates a part of the loop by opening when the line voltage drops below 14Volts. These modules should be spaced between groups of sensors or modules in a loop to isolate the faulty area from the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open state and isolate the devices between them. The remaining units on the loop continue to fully operate. A maximum of 20 devices recommended to connect each isolator. The module blinks to normal status and glow steady when activated. Product Overview: Features: Ÿ Module Status by YELLOW LED. Ÿ Low Standby Current. Ÿ Available with suitable back boxes

Product Details:

MonitInx is a compact, cost effective, intelligent addressable control panel has an extensive list of powerful features. The power supply, mother board and display boards housed in a FR-ABS Plastic cabinet, providing a complete fire control system for most applications. MonitInx is a single loop addressable fire control panel with easy to configure, that deliver uncomplicated solutions for small and mid-sized applications.

Product Details:

Product Description

Owing to the vast acquaintance, our firm is competent to present RE 316SH-2L Ravel Smoke Detectors. Our customers can avail this product as per their requirements.

Details:

UL Approved.

Advanced detection and communication protocol.

Easy installation and maintenance.

Sleek low-profile housing design.

Get best price for Photoelectric Multi Sensor RE 316SH-2L Ravel Smoke Detector

Product Details:

UL listed control relay module with dual potential free contact to integrate with any third party systems having RED coloured LED for status indications with 8 digit Dip switch for address settings.

Operating Voltage	:	24 VDC Nominal
Current Draw	:	2 mA Max.(Latched)
Standby Current	:	0.5 mA
Contact Rating	:	2A @ 30VDC(Resistive)
Temperature Range	:	0°C to 49°C./ 32°- 120°F
Humidity	:	93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F.

Product Details:

Product Specification Product TypeRE-326-S2L RAVEL SMOKE DETECTORBrandRavelUsage/ApplicationOffice BuildingsAlarm Sensor TypePhotoelectricPower Source24 VOLTColorWHITEAutomation GradeAutomaticMaterialABSWarranty1 YEARFire ResistanceYesInstallation ServiceYesCountry of OriginMade in IndiaMinimum Order Quantity1 Piece Product.
DescriptionOperating Voltage:9 ~ 33V DCOperating Temperature:-10 °C to 37.8 °CStorage Temperature:-10 °C to 60 °CHumidity:0 – 95% RH, non-condensingReset Voltage:less than 1VStandby Current:-50 μA.Start up Time:60s.Start-Up Current:170 μA.Alarm Current:90 mA.(Max).Remote Output:15mA maximum open collectorSmoke Sensitivity:(1.96 ± 0.76) % / ftAir Velocity:0 – 4000 fpm.Cycle time:5 SecInstallation Space:5 meters.

Get best price of Ravel RE326 Smoke Detector at ₹560 /-

 

Product Details:

The Isolator Base is a bidirectional protection device to be installed between every 16 no’s of devices to isolate the circuit from single short circuit and keep the system working normally except those short circuited area. This is non addressable device, having yellow LED indications on the base.

Electrical Characteristics

Supply voltage (min)	:	17V
Max Supply Voltage(Vmax)	:	28VDC, 37VPeak
Nominal Supply Voltage(Vno)	:	24VDC
Quiescent Current at 24V(Ic)	:	30µA
Leakage Current at 24V(IL)	:	2 mA when isolating
Max Curent (through loop)(IS)	:	1A continuous, 3A Peak
Isolating Voltage (Vco)	:	<14V
Maximum on resistance(Zc)	:	0.02Ω
Re-connect Voltage(Voc)	:	14 ~ 16V
Dimensions	:	(96 Lx76 Bx22 H)mm

Additional Information:

• Item Code: RE-314BI
• Delivery Time: READY STOCK
• Packaging Details: 10 NOS IN A BOX

Product Details:

Product Details:

UL Listed Analogue addressable Heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in colour,shall be polarity insensitive.easy to install,advanced detection and communication protocol.

Product Details:

Product Specification Product Description

We are offering an extensive series of RE-RI Ravel Response Indicator Fire Alarm System. These products are extremely employed in the market for diverse purposes.

Additional Information

Product Details:

Modbus convertor converts the Ravel protocol to Modbus protocol with RS485 serial communication. This convertor normally used in integrating with equipments like SCADA,PLC's & BMS syste

Product Details:

• Easy to install.
• Operates on 24VDC
• 100db at 30cm.
• Low Current.
• Ceiling / Flush Wall Mount.

• Material	:	FR ABS Plastic
  Input Voltage	:	24V DC (15-30V)
  Current	:	100 mA @24V
  Relative Humidity	:	93 +- 2 @ 32OC
  Operating Temperature	:	-10 to 50OC
  Sound Level	:	88 db +/- 5dB @ 30cm
  Tone Type	:	1. Ambulance 2. Police car 3. Fire Engine
  Size	:	126(W)*126(H)*55(D)mm

Product Details:

Conventional Hooter

Feature 

• Attractive low profile design
• Excellent lateral sound distribution

Get best price for Ravel Fire Alarm Hooter

Product Details:

1. Electrical Specification

 

Mechanical Specification

 

Compatible Devices

 

Ordering Information

 

Note :
* By default Repeater panel is designed for Wall mounting only.
* If Specified Repeater panel will be designed for Flush Mounting.
* W – White Color ; R – Red Color ; B – Black Color

•  

• Addressable System 
• Conventional Fire System 
• Gas Suppression System 
• Public Address System 
• Fireman Telephone System 

Product Details:

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCD character, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Product Details:

• EN54-11 Approved Type A Indoor Use.
• Re-Settable by an element kit.
• Suitable for flush or surface mounting
• Module Addressing by 8 way DIP Switches.
• Low Standby Current.

• Operating Voltage	:	24VDC.
  Power-up surge current	:	0.8mA
  Quiescent Current	:	0.5mA.
  Alarm Current	:	5.8mA

• Temperature	:	0 49 C
  Relative Humidity	:	0 93% non-condensing
  Connection	:	2.5mm2 Max.
  Weight	:	125g.
  IP Rating	:	IP 53
  Dimension	:	92mm X 92mm X 48 mm

   

Product Details:

• Wall or Ceiling mountable
• Mini Horn with BackBox
• 24VDC Operation
• They are used in Fire, Burglar & Emergency Alarm System.

Product Details:

Product SpecificationSystem ComponentsFire Alarm Control PanelTypeConventionalMaterialMild SteelColorGreyUsage/ApplicationOfficeBrandRavelModel Name/NumberRE-120GRPower220-240 V ACFrequency50 HzOperating Temperature0 to 49 Degree CRelative Humidity93%Operating Current0.75 AIP RatingIP50Weight7 KgMinimum Order Quantity1 PieceProduct Description
As a customer-focused organization, we are providing a wide array Ravel 2 Zone Gas Release Panel. In addition to this, we are providing these products at very leading prices.

Product Details:

Product SpecificationMaterialABS PlasticOperating Temperature Range-20 to +55 Degree CBrandRavelModel NumberRE-428FROperating Voltage14 to 36 VDCOperating current5mAFast Alignment Mode33mAStorage temperature-40 to +85 Degree CProduct Description
Owing to devoted experts, we have been competent to present a wide range of RE-428FR Ravel Beam Detector. These products are made as per industry norms and standards.

Product Details:

Product Specification Product Description

Our affluent industrial knowledge helps us in presenting an extensive series of Ravel Abort Manual Call Point. Our products can also be customized as per necessities of our patrons.

Details:

• Lift and pull.
• Break glass cover.
• Weather and explosion proof version.
• All station offer hex screw or key low access.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

The RE-24ES is an addressable loop sounder is designed to be connected to analogue addressable Fire Alarm Systems. And these loop powered sounder should be connected to the compatible control panel. The RE-24ES loop powered sounder base receives their power from analogue addressable communication loop and it is controlled via ravel protocol communication. The address of these device should be in the range of 128 to 147 addresses and it shall be set by programming tool or through the Panel. It can be flush / ceiling mounting with / without back box Features: Electrical Specification ??Loop powered Sounder ?Addressing by soft addressing tool. ?Low Standby Current. ?Inbuilt Isolator. ?Slim and Sleek ?Wall or Ceiling mountable ?8 Different tone selection using 4 way DIP switch Loop Powered Sounder with Back Box

Product Details:

Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold Ÿ 2 Green LEDs and 1 Yellow LED for alignment status. Ÿ System status : Green LED flashing every 10 sec in normal condition Red LED flashing every 10 sec in alarm condition Yellow LED flashing every 10 sec for obscuration or every 5 sec for contamination in Fault condition Ÿ Flat front face with enclosed optics. Cleaning the optics does not affect alignment.  UL approval Pending.