Edward Fire Alarm System

Product Details:

The Single Input Module SIGA-CT1, is a component of the Signature Series System. The SIGA-CT1 is an analog addressable device used to connect a Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuit (IDC) to a Signature Loop Controller. One (1) Device is required. Models SIGA-CT1 Features - MULTIPLE APPLICATIONS Including Alarm, Alarm with delayed latching (retard) for waterflow applications, Supervisory, and Monitor. The installer selects one of four (4) personality codes to be downloaded to the module through the loop controller. n PLUG-IN (UIO) OR STANDARD 1-GANG MOUNT UIO versions allow quick installation where multiple modules are required. The 1-gang mount version is ideal for remote locations that require a single module. - AUTOMATIC DEVICE MAPPING Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop. - ELECTRONIC ADDRESSING Programmable addresses are downloaded from the loop controller, a PC, or the SIGA-PRO Signature Program/ Service Tool. There are no switches or dials to set. - INTELLIGENT DEVICE WITH MICROPROCESSOR All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required. - NON-VOLATILE MEMORY Permanently stores serial number, type of device, and job number. Automatically updates historic information including hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. - STAND-ALONE OPERATION The module makes decisions and inputs an alarm from initiating devices connected to it even if the loop controllers polling interrogation stops. - DESIGNED TO ISO 9001 STANDARDS

Additional Information:

• Delivery Time: Ready Stock

Product Details:

The iO-Series panels provide a new standard in small building life safety. This small panel packs a punch and like its larger cousins the EST3 and EST3X it utilizes intelligent detection components to provide unparalleled detection. Whether you're using the iO1000 or iO64 you can take advantage of detectors that continuously tune the detectors sensitivity to meet environmental conditions. These types of innovation reduce the risk of false alarm providing peace of mind to your tenants.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: The iO1000 loop controller modules may be added in combination to expand total system capacity in 250-point increments to up to 1,000 device addresses.

Product Details:

Wholesale Trader of a wide range of products which include siga- PD smoke detectors est addressable for industrial, edwards est siga-ps intelligent photoelectric smoke detector, edwards siga-pd intelligent photoelectric sensor head detector, edwards est siga-hrd- fixed/ ror heat detector, edwards EST siga-PHD intelligent multisensor smoke and heat detector and est siga-phs edward smoke detector.

Additional Information:

• Production Capacity: Ready Stock

Product Details:

Product Specification Product DescriptionOperating voltage15.20 to 19.95 VDCNormal operating current51 µAAlarm current68 µASmoke Sensitivity RangeUL/ULC: 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) obscurationVibration level10 to 35 Hz, with an amplitude of 0.01 in.Air velocity0 to 4,000 ft./min (0 to 20 m/s)Wall mounting12 in. (305 mm) max. from ceilingCompatible basesSee Ordering InformationCompatible detector testersTestifire 1000, Testifire 2000Operating environment32 to 120°F (0 to 49°C), 0 to 93% RH, noncondensingConstructionHigh Impact Engineering Polymer, WhiteStorage temperature-4 to 140°F (-20 to 60°C)Environmental compensation AutomaticAgency ListingsCAN/ULC-S529, UL 268, 268A, CSFM, FM approved

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Edwards EST SIGA-CT1 Single Input ModuleThe Edwards / EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect one Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). The Signature Series modules are compatible only with ESTs Signature Loop Controller.

Additional Information:

• Production Capacity: As Per Availibilty
• Delivery Time: Ready Stock

Product Details:

EST3X is a next generation fire alarm system, with new multi-message displays, innovative controls, intuitive interface, new microprocessors and bold colors. The system follows with the EST3 architecture, having a robust modular control panel that unifies fire alarm, security and mass notification systems. The EST3X fire alarm system remains a leader in the field with the ability to have up to eight panels networked. Making the EST3X an ideal solution for mid to large size facilities. With intelligent devices throughout the network the EST3X system ensures uncompromising quality in the detection of fires in your building.

The extensibility of smart devices through the field, plays a key role in the EST3X system in providing additional features such as security and mass notification. Whether you have a new installation or an existing installation, the EST3X is capable of networking with up to 64 additional panels of an EST3 system. This makes the EST3X an ideal control panel for retrofits or additions. Leveraging existing fire alarm system infrastructure is a great way to shorten time and costs of your projects.

Product Details:

w/Fault Isolator SIGA-IB
If you are in need of a new base for your smoke detector, the team at Life Safety Consultants is here to help.
We have a number of models to choose from, including the EST Detector Mounting Base w/Fault Isolator SIGA-IB.
This base is compatible with several different EST detectors, including the SIGA-PS, SIGA2-PS, SIGA-PD, SIGA-PHS, SIGA-IPHS, SIGA-IS, SIGA-HFS, and the SIGA-HRS detector.
This base will ensure your system remains operational at all times, so order yours today.
For more information about this base, or any of the other parts we offer, call us

Get best price for Plastic White SIGA-IB Edwards Isolator Base, For Isolate To Detector, 24 V Dc

Additional Information:

• Delivery Time: Ready Stock

Product Details:

The SIGA-OSHD provides an optical smoke sensor and a rate-of-rise heat sensor with a fixed temperature setting
The Signature Optica Series SIGA-OSHD smoke detector brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

The SIGA-OSHD provides an optical smoke sensor and a rate-of-rise heat sensor with a fixed temperature setting. Together these sensors efficiently detect smoldering fires, as well as fast flaming fires.

Like all Signature Optica Series detectors, the SIGA-OSHD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSHD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings.

Product Details:

The EST Signature Series Model SIGA-PS Intelligent Photoelectric Smoke Detector gathers analog information from its smoke sensing element and converts it into digital signals. SIGA-PS on- board microprocessor measures and analyzes these signals. SIGA-PS compares the information to historical readings and time patterns to make an alarm decision.

Get best price of Edwards EST SIGA- PS Smoke Detector at ₹1650 /-

Product Details:

EDWARD MULTI DETECTOR 

Standard Signature Series Features

• Fixed temperature and rate-of-rise heat detection
• Uses existing wiring• Ground fault detection by module
• Up to 250 devices per loop (125 detectors and 125 modules)• Non-volatile memory• Electronic addressing
• Standard, relay, fault isolator, and audible mounting bases

Get best price for EST Plastic Siga-PHS Edward Smoke Detector

Product Details:

Standard Features

Right or left hand hinging of doors

Lag and Keyway holes for quick mounting

Attack rated door for security applications Knockouts for 3/4 inch conduit

Attractive contour door design on lobby enclosures Combination fl ush or surface mounting lobby enclosure design

Remote closet cabinets for electrical closet mounting support up to 65 AMP hour batteries

Get best price for 3-Cab7b  Est-3  Cabinet EST-Edward

Product Details:

Edwards EST 3-CHAS7 takes one chassis space in wallbox, provides space for 7 local rail modules, up to two power supplies, and a 1⁄2 footprint module.

EST3 has a wide selection of cabinet arrangements allowing the greatest use of EST3’s flexible modular design. Lobby enclosure wallboxes are manufactured from #14 AWG cold rolled steel with a gray baked enamel finish. Lobby enclosure doors are manufactured from #14 AWG cold rolled steel and have a modern contoured door design with integral viewing window. The exception is the small lobby enclosure 3-CAB5. The 3-CAB5 wallbox and non-contoured door are #16 AWG cold rolled steel. Lobby enclosure doors come with gray baked enamel or optional red baked enamel finishes. The EST3 lobby enclosures back boxes, doors and chassis units are ordered and shipped separately. The 3-CAB5 lobby enclosure comes complete with door and back box providing space to mount five local rail modules.

The EST3 remote closet cabinet design allows the installation of control panel electronics in electrical closets. The remote closet cabinets have left hand hinged doors and are available with red finish only. Optional display modules used for system diagnostics display, mount behind the closet cabinet door and are not visible with the door closed.

Product Details:

The operation of the SIGA-CC1/MCC1 and SIGA-CC2/MCC2 is determined by their sub-type code or “Personality Code”. The code is selected by the installer depending upon the desired application and is down-loaded from the loop controller. Codes 5 and 6 apply to the SIGA-CC1/MCC1 only. Code 7 is assigned to the SIGA-CC2/MCC2 only and automatically applies to both circuits (A and B). Personality Code 5: SIGNAL POWER or AUDIO EVACUATION (SINGLE RISER). Valid for the SIGA-CC1/MCC1 only. Configures the module for use as a Class B Audible/Visible Signal power (24 Vdc polarized) or Audio Evacuation (25 or 70 VRMS) power selector. The ring-tone generator is disabled. The output circuit is monitored for open or shorted wiring. If a short exists, the control panel inhibits the activation of the audible/visible signal circuit to prevent connection to the power circuit. Personality Code 6: TELEPHONE w/RING-TONE (SINGLE RISER). Valid for the SIGA-CC1/MCC1 only. Configures the module for use as a Telephone power selector. When a telephone handset is plugged into its jack or lifted from its hook, the module generates its own Ring-Tone signal. A separate ring-tone circuit is not needed. The module sends this signal to the control panel to indicate that an off-hook condition is present. When the system operator responds to the call, the ring-tone signal is disabled. Personality Code 7: SIGNAL POWER or AUDIO EVACUATION (DUAL RISER). Valid for the SIGA-CC2/MCC2 only. Configures the module for use as a two circuit Class B Audible/Visible Signal power (24 Vdc polarized) or Audio Evacuation (25 or 70 VRMS) power selector. The single output circuit is monitored for open or shorted wiring. If a short exists, the control panel inhibits the activation of the audible/visible signal circuit to prevent connection to the power circuit.

Product Details:

EST3X is a next generation fire alarm system, with new multi-message displays, innovative controls, intuitive interface, new microprocessors and bold colors. The system follows with the EST3 architecture, having a robust modular control panel that unifies fire alarm, security and mass notification systems. The EST3X fire alarm system remains a leader in the field with the ability to have up to eight panels networked. Making the EST3X an ideal solution for mid to large size facilities. With intelligent devices throughout the network the EST3X system ensures uncompromising quality in the detection of fires in your building.

The extensibility of smart devices through the field, plays a key role in the EST3X system in providing additional features such as security and mass notification. Whether you have a new installation or an existing installation, the EST3X is capable of networking with up to 64 additional panels of an EST3 system. This makes the EST3X an ideal control panel for retrofits or additions. Leveraging existing fire alarm system infrastructure is a great way to shorten time and costs of your projects.

Product Details:

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

EDWARDS
 
The iO-Series panels provide a new standard in small building life safety. This small panel packs a punch and like its larger cousins the EST3 and EST3X it utilizes intelligent detection components to provide unparalleled detection. Whether you're using the iO1000 or iO64 you can take advantage of detectors that continuously tune the detectors sensitivity to meet environmental conditions. These types of innovation reduce the risk of false alarm providing peace of mind to your tenants.
 

Product Details:

  Standard Signature Series Features • Fixed temperature and rate-of-rise heat detection• Uses existing wiring
• Ground fault detection by module
• Up to 250 devices per loop (125 detectors and 125 modules)
• Non-volatile memory
• Electronic addressing
• Standard, relay, fault isolator, and audible mounting bases
• Normal Polling Flash

Get best price for Plastic SIGA-DSI Edward Smoke Detectors

Product Details:

The Edwards EST SIGA-CT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). For use exclusively with Edwards / EST Signature Loop Controller

Additional Information:

• Delivery Time: As Per Availlibility

Product Details:

EDWARDS EST3X is a next generation fire alarm system, with new multi-message displays, innovative controls, intuitive interface, new microprocessors and bold colors. The system follows with the EST3 architecture, having a robust modular control panel that unifies fire alarm, security and mass notification systems. The EST3X fire alarm system remains a leader in the field with the ability to have up to eight panels networked. Making the EST3X an ideal solution for mid to large size facilities. With intelligent devices throughout the network the EST3X system ensures uncompromising quality in the detection of fires in your building. The extensibility of smart devices through the field, plays a key role in the EST3X system in providing additional features such as security and mass notification. Whether you have a new installation or an existing installation, the EST3X is capable of networking with up to 64 additional panels of an EST3 system. This makes the EST3X an ideal control panel for retrofits or additions

Product Details:

Addresable system

EST provides sophisticated building solutions: fire alarm systems, mass notification, fire alarm panels, evacuation panels, UL864 9th edition fire alarms.

Product Details:

The EST Signature Series Model SIGA-PS Intelligent Photoelectric Smoke Detector gathers analog information from its smoke sensing element and converts it into digital signals. SIGA-PS on- board microprocessor measures and analyzes these signals. SIGA-PS compares the information to historical readings and time patterns to make an alarm decision.

Get best price for Edward Smoke Detectors

Product Details:

Product Details:

The Edwards Scanning Technology (EST) SIGA-PS Intelligent 3D Multisensor Detector is a combination Photoelectric Smoke cum Fixed-Temperature Heat Detector, part of the Signature Series of Analog Addressable Initiating devices.

Edwards EST SIGA-PS detectors are compatible with EST’s Signature Loop Controller.

COMPATIBLE BASES and ACCESSORIES:
SIGA-SB Detector Mounting Base - Standard

Request
Callback

Product Details:

EST3 is a robust modular control panel that unifies fire alarm, smoke control, security and mass notification systems. The EST3 fire alarm system is a leader in the field with the ability to have network panels with overall length in excess of 300,000 ft. Making the EST3 an ideal solution for any size facility. The EST3 system accomplishes this by using a token ring network delivering fast alarm response times across any size network. With intelligent devices throughout the network the EST3 system ensures uncompromising quality in the detection of fires in your building. The extensibility of smart devices through the field, plays a key role in the EST3 system in providing additional features such as security and mass notification. The EST3 control panel is listed by Underwriters Laboratories (UL) in the categories of fire, smoke control, security and was the first fire alarm system UL listed to the new UL 2572 Mass Notification standard. Whether you have a new installation or an existing EST3 installation, you will be able to leverage the fire alarm system infrastructure for new mass notification requirements. This integration leverages the subsystems of the fire alarm saving time and money in the deployment of smoke control, mass notification and security.

Product Details:

EST G1RF-HDVM Multi-candela Horn-Strobe features a selectable 15 cd, 30 cd, 75 cd, or 110 cd output. Operating voltage: 16-33 VDC Horn temporal rate synchronized with optional G1M Genesis Signal Master or G1M-RM Genesis Signal Master Remote.

Get best price for G1RF-HDVM   Sounder / Horn Cum Strobe   Est-Edward

Product Details:

SIGA-270The Edwards EST SIGA-270 Single Action Pull Station is compatible only with GE Security???s Signature Loop Controller.?? Place your order today and we will ship your replacement pull station immediately

Product Details:

Edwards EST SIGA-CR Control Relay ModuleThe Edwards / EST SIGA-CR Control Relay Module provides a Form ???C??? dry relay contact to control external appliances such as door closers, fans, dampers etc. This device does not provide supervision of the state of the relay contact. Instead, the on-board microprocessor ensures that the relay is in the proper ON/OFF state. Upon command from the loop controller, the SIGA-CR/MCR relay activates the normally open or normally-closed contact. The Signature Series modules are compatible only with GE Securitys Signature Loop Controller

Additional Information:

• Production Capacity: As per availibility
• Delivery Time: Ready Stock