Honeywell Fire Alarm Systems

Product Details:

Conventional optical smoke detector
Order code:2351EGuaranty time(months):24Manufacturer:System SensorDescription:
Conventional optical smoke detector, automatic drift compensation, voltage 8-30VDC/ current 0,16mA quiescent and 80mA in alarm, IP43 when installed on WB-1 shroud, -30° to 70°C, certificate 0832-CPD-0059 (Ademco 2610EC)

Technical parameters

Accessories
Alternative products
Product query
Basic parametersDimension - heigth 38 mmPower supply voltage 8 - 30 V DCConsumption - in rest state 0,075 mAOperating temperature -30 - 70 °CDimension - diameter 102 mmConsumption - max. 80 mAProtection level IP43

Product Details:

Information
Name :Loop Driver Card for Morley IAS protocol 460 MA, Honeywell International, Inc
 Morley-IAS
Category :Addressable Panel,Fire,Panel Accessories,Products
UPC Code :MOF795072100

Product Details:

Honeywell -Morley Manual Call Point
Addressable Manual Call Point. Glass element included. Requires SR1T for surface mounting or a single gang backbox for flush mounting.
- Unique Plug and Play
- Anti tamper facility
- Enhanced aesthetics and compact design
 
Get Best Price Of The Honeywell Morley-IAS Conventional Manual Call Point (MI-MCP-FLEX) For Rs.2950/-

Product Details:

Product Details:

FEATURES AND BENEFITS • Available with or without short circuit isolation • Isolator per device allows faster, more precise fault finding • Rotary decade address switches • Ivory colour to harmonise with the modern built environment • Worldwide proved reliability • Easy to maintain (washable filter) • Enhanced smoke chamber design to reduce false alarms by dust or contamination • Fast installation with rotatory addressable switches (01-99) • 2 state LED for 360º indication • Aesthetic design to harmonise with the modern built environment • Base complements the detector and is easy to install and wire • Genuine and fast response • Advanced protocol and smoothing filter to suppress false alarm • Analog addressable communication • Dual integrated LED for 360° visibility • Conforms to EN54-7 • LPCB approved • Environment friendly - meets RoHS legislative requirement

Product Details:

NOTIFIER's offers a variety of intelligent monitor modules for diverse applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. Monitor modules model numbers include the FMM-1, FMM-101, FZM-1 and FDM-1.
Features & Benefits:  

Built-in type identification automatically identifies this device as a monitor module to the control panel

SEMS screws with clamping plates for ease of wiring

Direct-dial entry of address: 01 – 159

LED indication for normal or off normal indication

FMM-1 Monitor Module

Class A supervised wiring to the monitored device

FMM-101 Mini Monitor Module

Class B supervised wiring to the monitored device

Smaller size fits inside devices or junction boxes

FZM-1 Zone Interface Monitor Module

Transmits the status of one zone of 2-wire detectors to the fire alarm control panel

Status conditions are reported as normal, open, or alarm

FDM-1 Dual Monitor Module

Monitors two separate Class B circuits

Additional Information:

• Production Capacity: Maximum
• Delivery Time: Ready Stock

Product Details:

NOTIFIER’s intelligent addressable isolator module, the ISO-X is used with Fire Alarm Control Panels to protect the system against wire-to-wire short circuits on the Signaling Line Circuit loops. The ISO-6 is a six fault isolator module providing isolation on six equivalent circuits.

Features & Benefits:

• Enables part of the communications loop to operate when a short circuit occurs
• Automatically resets on correction of short
• ISO-X
  • SEMS screws with clamping plates for ease of wiring
• ISO-6
  • Removable 12 to 18 AWG plug-in terminal blocks
  • Six individual, Class B isolator circuits
  • Specifications
    • Normal Operating Voltage: 15-32 VDC
    • Stand-By Current: 450μA (not isolating) per circuit
    • Maximum Current Draw: 17mA (device in isolation)
    • Temperature Range: 32°F to 120°F (0°C to 49°C)

Additional Information:

• Production Capacity: Maximum
• Delivery Time: Ready Stock

Product Details:

714-001-111
Single Loop Control Panel, 230Vac, 2 sounder circuits.
Dims 260 x 390 x 147mm (H x W x D)
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.
The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time effi cient fi re panel on the market to install. DXc Control panels are supplied without zone LEDs.
In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.
 

Product Details:

• Multiple loop options –half, 1 and 2 loops
• Up to 198 devices per full loop
• 160 fire zones
• 5,0 0 0 events log
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user
experience
• Mobile and PC apps for guided configuration
• Ability to configure panels off- site and sync via USB pen drive or Honey well Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864 10th Edition Certified

Additional Information:

• Delivery Time: ON ORDER

Product Details:

• multiple loop options –half, 1 and 2 loops
• up to 198 devices per full loop
• 160 fire zones
• 5,0 0 0 events log
• multiple output and input interfaces for a fully integrated fire alarm solution
• pluggable electrical connectors and ergonomic design for easy installation
• large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user
experience
• mobile and pc apps for guided configuration
• ability to configure panels off- site and sync via usb pen drive or honey well bluetooth
• battery-backed, real-time clock (rtc)
• 32-bit dual-core microprocessor
• ul 864 10th edition certified

interfaces
• 3 output relays with single pole changeover 24v dc 1 a: fire trouble & programmable (supervisory by default)
• 1 rs485 port for up to 4 repeaters or mimics or a combination of the two
• 1 rs232 ports: one for serial printer
• 2 usb ports: one for pen drive and honeywell bluetooth dongle and one reserved for future use
• 1 nac circuit with max 150 ma
• 2 on-board monitored inputs

mechnical specifications
dimensions [mm] (h x w x d) 465x408x153
weight (excluding batteries) 7 kg (246 oz) colour grey & red
mounting holes 3
knockouts (20mm)top: 16; back: 2
mounting type surface only
operating temperature 0°c to +49°c
relative humidity 5% – 95% non-condensing
material pc+abs plastic (bayblend fr3010- ul 94 5va). .
ip rating 30

electrical specifications
operating voltage 230v ac, 50/60 hz ac
psu rating1 loop (615-000-002 and 615-000-102) – 24v dc 2 a
2 loop (615-000-202) – 24v dc 6. 25 a
stand-by batteries2 x 12ah (recommended)
stand-by battery duration 24 hours back-up under normal condition
auxilliary output 24 v dc 100 ma
field strength 52v/m for 5w test condition

agency listings and approvals
listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• ul listed: s36244

Product Details:

interfaces
• 3 output relays with single pole changeover 24v dc 1 a: fire trouble & programmable (supervisory by default)
• 1 rs485 port for up to 4 repeaters or mimics or a combination of the two
• 1 rs232 ports: one for serial printer
• 2 usb ports: one for pen drive and honeywell bluetooth dongle and one reserved for future use
• 1 nac circuit with max 150 ma
• 2 on-board monitored inputs

mechnical specifications
dimensions [mm] (h x w x d) 465x408x153
weight (excluding batteries) 7 kg (246 oz) colour grey & red
mounting holes 3
knockouts (20mm)top: 16; back: 2
mounting type surface only
operating temperature 0°c to +49°c
relative humidity 5% – 95% non-condensing
material pc+abs plastic (bayblend fr3010- ul 94 5va). .
ip rating 30

electrical specifications
operating voltage 230v ac, 50/60 hz ac
psu rating1 loop (615-000-002 and 615-000-102) – 24v dc 2 a
2 loop (615-000-202) – 24v dc 6. 25 a
stand-by batteries2 x 12ah (recommended)
stand-by battery duration 24 hours back-up under normal condition
auxilliary output 24 v dc 100 ma
field strength 52v/m for 5w test condition

agency listings and approvals
listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• ul listed: s36244

Product Details:

Product Description

Honeywell HM PSE/B501 Smoke Detector uses the central photoelectric smoke detector thermal assistance to provide enhanced false alarm immunity and faster response to a large variety of incipient fires. The plug-in unit combines two different sensing components to act as a single device, which is operated by embedded software. The optical-thermal detector complies with EN54-7, a fixed temperature of 58 ° C, and the rate of thermal assistance increases consistent with EN54-5. The thermal detection method incorporates the thermistor technology with a linear temperature response corrected by the program. In locations where normal daytime actions can potentially trigger undesirable alarms, the detector can be configured to work in a “heat-only” mode, automatically returning to full photothermal activity during unoccupied hours. The sensing elements of the optical-thermal HM-PTSE detector are adjustable so that the sensitivity thresholds of each element can be adjusted by the panel which offers the ability to customize the system to change the area it is Secure. The detector has two integrated red LEDs that provide a local visual indication of system status at 360 °.
Features of Honeywell HM PSE/B501 Smoke Detector

• Rotary decade address switches
• Aesthetic design to harmonize with the modern built environment
• Base complements the detector and is easy to install and wire
• Genuine and fast response
• Advanced protocol and smoothing filter to suppress false alarm
• Easy to maintain (washable filter)
• Analog addressable communication
• Enhanced smoke chamber design to reduce false  alarms by dust or contamination
• Dual integrated LED for 360° visibility
• LPCB approved
• Conforms to EN54-7/ EN54-5 and EN54-29
• Environment friendly – meets RoHS legislative requirements
• For DXc fire alarm panels R7, 8, 9

Additional Information

Product Details:

Manual Call Point Notifier

Brand  Notifier

  Feature

• Manual Call Point is the small red box with the glass panel and button.
•  Breaking the glass and pushing the button will activate the Fire Alarm.
  Mobility Impaired Person – A person with physical, mental or sensory impairment, either temporary or permanent, who requires assistance during emergency evacuations.
• Mobility Impaired Person – A person with physical, mental or sensory impairment, either temporary or permanent, who requires assistance during emergency evacuations.

Get best price for Notifier NBG -12LX Manual Call Point

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Notifier NFS2-3030 is an intelligent Fire Alarm Control Panel designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS2-3030 is ideally suited for these applications. The NFS2-3030 is part of the ONYX Series of products from NOTIFIER. The NFS2-3030 is ideal for virtually any application because it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs), the NFS2-3030 supports up to 3,180 intelligent addressable devices.

Information is critical to fire evacuation personnel, and the NFS2-3030's large 640-character Liquid Crystal Display (LCD) presents vital information to operators concerning a fire situation, fire progression, and evacuatio n details. A host of other options are available, including single- or multi-channel voice; firefighters telephone; LED, LCD, or PC-based graphic annunciators; fire or integration networking; advanced detection products for challenging environments, and many additional options.

Product Details:

MCP5A-RP01FG-01 Addressable Manual Call Point. Glass element included. Requires SR1T for surface mounting or a single gang backbox for flush mounting. - Unique Plug and Play - Anti tamper facility - Enhanced aesthetics and compact design

Product Details:

Specifications for FRM-1:

• Normal operating voltage: 15 to 32 VDC
• Maximum SLC current draw: 6.5 mA (LED on)
• Temperature Range: 32°F to 120°F (0°C to 49°C)
• Dimensions: 4.675˝ H x 4.275˝ W x 1.4˝ D (Mounts to a 4˝ square by 21/8˝ deep box.)

Listings:

• UL: S635
• FM Approved
• CSFM: 7300-0028:0219
• MEA: 14-00-E
• FDNY: COA #6067, #6065

Product Details:

The HML/RHSE thermal detector forms part of the HML Series range of addressable detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing detector technology
• Low profile design
• Low current draw
• Backward compatible with Series 100 detector range of bases
• Wide operating voltage 8 to 30VDC
• Bi-colour LED detector status indicator
• Programmable sensitivity
• Addressable feature
• Advanced maintenance features via remote hand-held test unit
• Range of detector bases available

Product Details:

The Morley-IAS MI-DCMO control output module is used with the ZX series of intelligent control panels to provide either a single alarm circuit or Form C relay. The MI-DCMO can be used to operate dry contacts for door holders, air handling unit shut down or other similar functions. Optionally the module can be used to supervise wiring to the output load providing monitoring of the external load voltage or power supply.

Additional Information:

• Delivery Time: SUBJECT TO AVAILBILITY
• Packaging Details: 8 NOS IN A STANDARD BOX

Product Details:

NETWORKING FEATURES • Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops) • True peer-to-peer and fault tolerant network for high system reliability • BS5839 part 1 compliant network PANEL FEATURES • Disable all relays • Optional 40, 80 or 160 zone alarm LEDs • Easy 5 key-press set-up • Large blue LCD display • Supports USB upload/download • Supports connection of external printer.Handheld printer (PRINTERHAND) available seperately • Alpha-numeric style keypad and navigation keys • Option to upload a company logo • 160 zone compact mimic support • Panel buzzer ‘mute’ in engineering mode • Up to 72 hour standby • 3 min Inhibit Timer function • Remote LED Support • Level -3 configurable Passcode support • Sounder Synchronization • System IO Card support - Pt13 compliant (Only with DXc-1 & DXc -2) • Fire Brigade Control & Indication panel Support (Only with DXc-1 & DXc -2) • Fire Transmission & Keysafe Support • Fire Transmission LED Support SOFTWARE FEATURES • PC configuration software (supplied with panel) • 160 fire zones (can be used with or without LEDs) • 7 day timers • Event logging • Onboard diagnostics • Class change function • Coincidence and verification detection for false alarm management • Sensitivity adjustment e.g. between day and night • Input/output logic • Enhanced zone support up to 160 LEDs • Type B dependency • Alternative zone referencing scheme • Programming optional language support • Event Logic support • Remote LED Event Logic HARDWARE FEATURES • Battery backed real-time clock (2 & 4 loop) • 2 independent sounder circuits • 500mA multi-protocol loop driver • 2 x onboard monitored inputs • Optional programmable keyswitch for selected functions • Plug-in connectors Output Relays: Fire relay: Single pole changeover 24V DC 1A Extended: Single pole changeover 24V DC 1A Aux relay: Programmable single pole changeover 24V DC 1A Onboard Data Ports: 1 x RS485 (Repeater connection) 1 x PC Programming Port4 Optional Ports: RS232 third party protocol interface Sounder Circuits: 2 output circuits, 1A per circuit.1

Product Details:

• Certified for seismic applications when used with the appropri- ate seismic mounting kit.
• Approved for Marine applications when used with listed com- patible equipment. See DN-60688.
• One, expandable to two, isolated intelligent Signaling Line Cir- cuit (SLC) Style 4, 6 or 7.
• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820.
• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/636 per FACP or network node.
Detectors can be any mix of ion, photo, thermal, or multi-sen- sor; wireless detectors are available for use with the
FWSG.
– Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or
relay; wireless modules are available for use with the FWSG.
• Standard 80-character display, 640-character large display (NCA-2), or display-less (a node on a network).
• Network options:
– High-speed network for up to 200 nodes (NFS2-3030, NFS2-
640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX- Works, NFS-3030, NFS-640, and NCA).
– Standard network for up to 103 nodes (NFS2-3030, NFS2-
640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX-
Works, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/
400, AFP-1010, and AM2020). Up to 54 nodes when DVC- EM is used in network paging.
• 6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System
Sen- sor, Wheelock, or Gentex strobe synchronization.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate
panel databases. Upgrade panel firmware.
• Autoprogramming and Walk Test reports.

Product Details:

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Features • Certified for seismic applications when used with the appropriate seismic mounting kit. • Approved for Marine applications when used with listed compatible equipment. See DN-60688. • One isolated intelligent Signaling Line Circuit (SLC) Class A, B, or X. • Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820. • Up to 159 detectors and 159 modules per SLC; 318 devices maximum. – Detectors can be any mix of photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG(A). – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG(A). • Standard 80-character display. • Network options: – High-speed network for up to 200 nodes (N16e/x, NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA). – Standard network for up to 103 nodes (N16e/x, NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging. • 6.0 A power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization. • Built-in Alarm, Trouble, Security, and Supervisory relays. • VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware. • Autoprogramming and Walk Test reports. • Multiple central station communication options: – Standard UDACT – Internet – Internet/GSM • 80-character remote annunciators (up to 32). • EIA-485 annunciators, including custom graphics. • Printer interface (80-column and 40-column printers). • History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file. • Alarm Verification selection per point, with automatic counter. • Presignal/Positive Alarm Sequence (PAS). • Silence inhibit and Auto Silence timer options. • NAC coding functions: – March time. – Temporal. – California two-stage coding. – Canadian two-stage. – Strobe synchronization. • Optional cloud connectivity for remote off site monitoring through CLSS (see HON-62034) • Monitor multiple buildings through one off-campus central station, and report through the CLSS Gateway • Optional remote programing through CLSS • Field-programmable on panel or on PC with VeriFire® Tools program check, compare, simulate. • Full QWERTY keypad. • Battery charger supports 18 – 200 AH batteries. • Non-alarm points for lower priority functions. • Remote ACK/Signal Silence/System Reset/Drill via monitor modules. • Automatic time control functions, with holiday exceptions. • Extensive, built-in transient protection. • Powerful Boolean logic equations.

Additional Information:

• Delivery Time: SUBJECT TO AVAILBILITY
• Packaging Details: SINGLE UNIT

Product Details:

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM320s and five LEM-320s. The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

Product Details:

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The 2351EC detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition.
The HM-PSE, HM-PSE-S2 has two integral red LEDs that provide 360° local visual indication of the device status. B501AP (Base). 102mm. 52m m. 97g (inc base).
FSP-951 Notifier Smoke Detector ; Dimension. 5.3x10.4 cm ; Operating Temperature. 0-49 deg C ; Relative Humidity. 10-93 % ; Voltage Range. 15-32 V DC ; LED Current.Operating Temperature: 0-49 deg CDimension: 5.3x10.4 cm 

Product Details:

Morley-IAS HM Detectors Data Sheet Delivering a totally new detector platform, incorporating an advanced digital protocol Morley-IAS HM intelligent detectors incorporate incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more effi cient, less liable to false alarm due to dust and insects and less susceptible to fault in high air velocities or back pressure. Extensive hydrodynamic modelling has confi rmed the greater effi ciency of the new chamber and housing shape combination. Large-scale integration of the all-new electronics, through the fully automated surface mount PCB assembly, coupled with in-line testing through the manufacturing process, laser PCB cutting along with a completely new compound of plastic offers improved quality and reliability. All HM detectors are environmentally friendly and meet the WEEE and RoHS legislative requirements, minimising end of life disposal costs.

Product Details:

Product Specification Product DescriptionProduct Description:
The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. 

The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R). 

The HM-FHSE, HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). These sensors are designed for open area protection and must only be connected to fire panels that use a compatible proprietary communication protocol for monitoring and control. The detectors have two integral red LEDs that provide 360° local visual indication of the device status. 

Features:

• Available with or without short circuit isolation 
• Isolator per device allows faster, more precise fault finding
• Rotary decade addressswitches
• Ivory colour to harmonise with the modern built environment
• Worldwide provedreliability
• Easy to maintain (washable filter)
• Enhanced smoke chamber design to reduce false alarms by dust or contamination
• Fast installation with rotatory addressableswitches (01-99) 
• 2 state LED for 360º indication
• Aesthetic design to harmonise with the modern built environment
• Base complements the detector and is easy to install and wire
• Genuine and fast response
• Advanced protocol and smoothing filter to suppress false alarm
• Analog addressable communication
• Dual integrated LED for 360° visibility
• Conforms to EN54-7
• LPCB approved
• Environment friendly meets RoHS legislative requirement

Product Details:

HM-PSE-AP Photoelectric Smoke Detectors The HM-PSE-AP photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and design Honeywell. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The devices utilize the universal MI/B501AP/IV base, making installation process simple and fast The HM-PSE-AP, HM-PSE-I-AP has two integral red LEDs that provide 360° local visual indication of the device status. 

Product Details:

SLC LOOP: • Two-wire SLC loop connection • Unit uses base for wiring • Compatible with FlashScan® and CLIP protocol systems • Stable communication technique with noise immunity ADDRESSING: • Addressable by device • Rotary, decimal addressing (Refer to the NOTIFIER panel manuals for device capacity.) ARCHITECTURE: • Sleek, low-profile, stylish design • Unique single-source design to respond quickly and dependably to a broad range of fires • Integral communications and built-in device-type identification • Built-in tamper resistant feature • Remote test feature from the panel • Walk test with address display (an address on 121 will blink the detector LED: 12-[pause]-1(FlashScan systems only) • Built-in functional test switch activated by external magnet • Removable cover and insect-resistant screen for simple field cleaning • Expanded color options OPERATION: • Designed to meet UL 268 7th Edition • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level • LED “blinks” when the unit is polled (communicating with the fire panel) and latches in alarm. • Low standby current MECHANICALS: • Sealed against back pressure • SEMS screws for wiring of the separate base • Designed for direct-surface or electrical-box mounting • Plugs into separate base for ease of installation and maintenance

Product Details:

The Notifier® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector's address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designated.

Product Details:

The Morley-IAS repeaters are compact remote control units for Morley-IAS intelligent multi protocol fire alarm control panels. These units, along with other I/O peripheral devices and theexternal printer further enhance the flexibility and functionality of our fire alarm control panel range.

The repeaters provide an extension to the operation of the fire alarm control panel. There are two types available - passive with indications only and no controls, or active with both controls and indicators. Both display the operational state of the control panel using the 80 character LCD display and the 7 LED status indicators.

In addition to the general status indicators the Active repeater is fitted with key operated "Access Enable" switch for the control functions. Individual buttons are provided for System Reset, Mute, Accept, Sound Alarms, Silence/Re-sound Alarms and Self test. Thus enabling control functions to be duplicated in strategic locations around the installation.

Product Details:

 10" high definition touchscreen display with customizable buttons • 6.0 A power supply with customizable outputs (see DN-62116) – Two auxiliary outputs configurable for resettable or non-resettable operation (Class B and Class A/B) – Four Class A/B power outputs that can be configured as Class A/ B Notification Appliance Circuits (NACs), power circuit, door holder circuit, or Universal Zone Coding circuit (UZC licensable option) – NACs support selectable System Sensor, Wheelock, and Gentex strobe synchronization – NACs support up to 3 patterns of output to allow dynamic signaling based on system events: Temp-3 (Fire), Temp-4 (CO), selective silence • Easy expansion of isolated intelligent Signaling Line Circuit (SLC) capacity – One expandable to three on N16e (three cards in the cabinet) – One expandable to ten on N16x 

Product Details:

• Automatic drift compensation
• Dust tolerant chamber with optimum detection performance and minimal nuisance alarms between maintenance visits
• Hand-held programming test unit
• Addressable feature
• Compatible with S300ZDU Zonal Display Unit
• Advanced maintenance features, implemented via a hand-held tool
• Read and write last maintenance date, chamber contamination level, thermal element value
• Programmable sensitivity
• Selectable Blink/No–Blink LED option via hand-held tool
• Automatic alarm test via hand-held tool
• Multi-function Alarm – Normal bi-colour LED indicator
• – 30°C to +70°C operating temperature range
• EN54 (2000) Part 5 Class A1R
• Backward compatible with Series 100 bases
• Wide operating voltage:8-30VDC

Additional Information:

• Delivery Time: SUBJECT TO AVAILBILITY
• Packaging Details: 8 NOS IN A BOX

Product Details:

The HM-PSE-UL addressable, low-profile plug-in photoelectric detectors use a state-of-the-art photoelectric sensing chamber with communications to provide open area protection – used exclusively with Fire Alarm Control Panels (FACPs). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, saving precious rescue time while also reducing property damage. It comes with two LEDs on each sensor light to provide a local, visible sensor indication.
HM-PSE-UL plug-in detectors use a detachable mounting base to simplify installation, service, and maintenance. Mount base (all base types) on an electrical backbox which is at least 1.5” (3.81 cm) deep. For a chart of compatible junction boxes 

Product Details:

SIGNALING UL LISTED Horn, Strobes & Horn Strobes Mounting plate included for compatibility with a wide range of back box sizes, Three field selectable candela settings: 15, 75, and 115, Easy to use rotary dials for selection of candela and horn ?settings, Built in synchronization feature keeps strobes in sync for up to ?30 minutes, ?Strobes Listed to UL1638; Horns Listed to UL464, Horn settings on the horn strobe model include high and low ?volume, continuous or temporal 3 tone, ?Round trim ring available for ceiling mount applications, ?Universal Fire symbol is language independent, Trim plate allows mini horn to mount to a variety of backboxes and fit aesthetically with the horn strobe and strobe

Additional Information:

• Delivery Time: INSTOCK
• Packaging Details: 5 NOS IN A BOX

Product Details:

721-001-301

721-001-301 ZX5Se 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.

Product Details:

The MA-2000 panel has a 7 “TF T touch display (800 x 480 with backlight) with 256 colours for entering the control panel programming data and interacting with the operators.
• 4 access levels in accordance with EN 54 standards
• Programmable text (32 characters) for points and zones
• Up to 2000 soft zones, 400 logical groups in stand-alone systems and 1600 groups in network configuration with 64 panels or 128 total loops
• Control-by-event (CBE) equations for activations with logical operators
• Historical log stores 10,000 events, plus 4,000 active events in non-volatile memory (standalone or network configuration)
• Clock in real time
• Auto-programming lines with automatic recognition of the model of the devices
• Decision algorithms for the alarm, pre-alarm and faults
• Automatic day / night sensitivity change
• Indication of the need to clean the smoke sensors
• Programmable alarm threshold for all sensors
• Walk-Test function by zone

Product Details:

WSO-PR-N00 & I00

High quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the digital protocol using the control panel.

WSO-PR-N00 - Red Wall Mount Sounder, with pure white skirt - non isolated.

WSO-PR-I00 - Red Wall Mount Sounder, with pure white skirt - isolated.

The range is installed simply by a twist fit onto the B501AP base.

Product Details:

The NOTIFIER® FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics, and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951 Series ideal for both system operation and building design. The point ID address, set using rotary decimal switches, provide specific detector locations.

The series includes a 135°F/57°C fixed-temperature, rate-of-rise, and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. Detectors are available for both FlashScan® and CLIP applications as designated.

Product Details:

Three different monitor modules are available for fire alarm control panels – suiting a variety of applications. Monitor modules supervise a circuit of drycontact input devices, such as conventional heat detectors and pull stations, or to monitor and power two-wire smoke detector circuits.

HM-DMMI-UL is a standard-sized module (typically mounts to a 4"/10.16 cm square box) that supervises Class B circuit of dry contact input devices.

HM-MM3E-UL is a miniature monitor module – 1.3" (3.302 cm) H x 2.75" (6.985 cm) W x 0.65" (1.651 cm) D – that supervises Class B circuit of dry-contact input devices. Thanks to its compact design, the HM-MM3E-UL can be mounted in a single-gang box behind the device it monitors.